Using the DMZ Address of the Radio's NAT

The DMZ for the Radio's NAT is:
IP: .........169.254.1.100
Subnet: ..255.255.255.0
Gateway: 169.254.1.1

Using this DMZ address will allow any incoming traffic to go directly to the specified address without filtering or blocking through NAT. Please be aware of the security concerns associated with this.
 
How to Set the DMZ IP address in Windows XP

This guide will change the way your computer gets its IP address by specifying the DMZ address. This is only useful if NAT is enabled on your radio. This will open your computer up to some vulnerabilities.

Assign the IP address
To set a static IP address:
. Open Windows Start menu.
. Open Control Panel.
. Classic view: Open Network Connections
Category view: Select Network and Internet Connections, and then Network Connections.
. Double-click on your active LAN or Internet connection.
. Click Properties.
This opens the Local Area Connections Properties window.
. In the General tab, highlight the Internet Protocol (TCP/IP) item, and click Properties.

 

This opens the Internet Protocol (TCP/IP) Properties window.

. In the General tab, click Use the following IP address, and enter:
. - IP address......... 169.254.1.100
. - Subnet mask..... 255.255.255.0
. - Default gateway. 169.254.1.1
. In Use the following DNS server addresses, enter :
DNS1: 66.112.177.4
DNS2: 66.112.177.5
. Click OK.
. Click OK again, and you're done.